Tuesday, November 5, 2013

Recycled I-Pod holder

My d.h. was working in the basement (it's a long story...) and was struggling to keep his i-pod from falling out of his pocket.  During lunch break, he asked if I could 'rig up' a band to go around his arm to hold the i-pod.  I think my son has one of those work-out bands for the i-pod, but I have no idea where he got it.  We talked about the design a little bit, and I took some measurements and got to work.

I have to explain something...I recycle fabric and findings from manufactured items, especially if they are unusual or difficult for the home sewer to purchase.  I knew I would need stretchy fabric, and started digging through my fabric stash to find something appropriate. Low and behold, I came across this:

I know you can buy neoprene somewhere, but it sure isn't anywhere near me!
It is a neoprene laptop computer sleeve.  It had a zipper that went around three sides, which I took the time to remove (you never know when you'll need a 20 inch zipper with double pulls).  Once all the stitching was removed, there was plenty of fabric to work with.

The deconstructed laptop bag.
I cut out a pocket the size of the i-pod, then I pieced together two longer strips equal to the circumference of his arm, plus three inches for a tab to make it adjustable.  Using a narrow zig-zag stitch, I stitched the pocket in place, then trimmed the ends of the strip so it would fit through a sliding buckle.

The pocket stretches a bit so the i-pod fits snugly.
Again, I found just what I needed in my stash.  Whenever my husband or kids throw away something like a backpack, I cut off the hardware and toss it into a bin.  There have been many occasions when I dig through that bin to find just the right hook, buckle or D-ring.

My tray of various buckles, clips, D-rings and other bits and pieces of hardware.
Next, I added a bit of velcro that I removed from something else once upon a time.  This piece has both the hook and loop part on the same side. The tab with the 'hook' part slips through the buckle, then folds back onto the 'loop' part to hold the armband in place.


Here's the final product.  Looks great, works great, d.h. is happy!  Now that he has tunes at his disposal, maybe the basement will be finished by Thanksgiving!!

1 comment: